MILITARY DATA SHEET Original Creation Date: 06/20/95 Last Update Date: 12/10/96 Last Major Revision Date: 06/20/95 MNLF156-X REV 0BL MONOLITHIC JFET INPUT OPERATIONAL AMPLIFIERS Industry Part Number NS Part Numbers LF156 LF156H/883 Prime Die LF156 Processing Subgrp Description MIL-STD-883, Method 5004 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MILITARY DATA SHEET MNLF156-X REV 0BL Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcc = +15V, Vcm = 0V, Rs = 50 Ohms SYMBOL Vio Iio +Iib -Iib PARAMETER CONDITIONS NOTES Input Offset Voltage Input Offset Current Input Bias Current Input Bias Current PINNAME MIN MAX UNIT SUBGROUPS -5 5 mV 1 -7 7 mV 2, 3 Vcc = +20V -5 5 mV 1 Vcc = +20V -7 7 mV 2, 3 Vcc = +20V -0.02 0.02 nA 1 Vcc = +20V -20 20 nA 2, 3 Vcc = +20V -0.1 0.1 nA 1 Vcc = +20V -10 50 nA 2, 3 Vcc = +20V, Vcm = -16V -0.1 0.1 nA 1 Vcc = +20V, Vcm = -16V -10 50 nA 2, 3 Vcc = +20V, Vcm = 16V -0.1 3.5 nA 1 Vcc = +20V, Vcm = 16V -10 60 nA 2, 3 Vcc = +20V -0.1 0.1 nA 1 Vcc = +20V -10 50 nA 2, 3 Vcc = +20V, Vcm = -16V -0.1 0.1 nA 1 Vcc = +20V, Vcm = -16V -10 50 nA 2, 3 Vcc = +20V, Vcm = 16V -0.1 3.5 nA 1 Vcc = +20V, Vcm = 16V -10 60 nA 2, 3 +PSRR Power Supply Rejection Ratio +Vcc = 20V to 10V, -Vcc = -20V 85 dB 1, 2, 3 -PSRR Power Supply Rejection Ratio -Vcc = -20V to -10V, +Vcc = 20V 85 dB 1, 2, 3 CMRR Common Mode Rejection Ratio Vcm = +11V 85 dB 1, 2, 3 Icc Power Supply Current 7 mA 1 14 mA 2, 3 -45 -15 mA 1 -35 -10 mA 2 -65 -15 mA 3 15 45 mA 1 10 35 mA 2 15 65 mA 3 +Ios -Ios Short Circuit Current Short Circuit Current Vout = 0V Vout = 0V 2 MILITARY DATA SHEET MNLF156-X REV 0BL Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcc = +15V, Vcm = 0V, Rs = 50 Ohms SYMBOL Vcm PARAMETER CONDITIONS NOTES Vcm Voltage Range 1 PINNAME MIN -11 MAX 11 UNIT SUBGROUPS V 1, 2, 3 12 V 4, 5, 6 10 V 4, 5, 6 -12 V 4, 5, 6 -10 V 4, 5, 6 AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Vcc = +15V, Vcm = 0V, Rs = 50 Ohms +Vop Output Voltage Swing Rl = 10K Ohms Rl = 2K Ohms -Vop Output Voltage Swing 1 Rl = 10K Ohms Rl = 2K Ohms Avs Large Signal Voltage Gain 1 Rl = 2K Ohms, Vout = 0 to 10V Rl = 2K Ohms, Vout = 0 to -10V Sr+ Slew Rate Av = 1 50 V/mV 4 25 V/mV 5, 6 50 V/mV 4 25 V/mV 5, 6 7.5 V/uS 9 DC PARAMETERS: DRIFT VALUES (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcc = +15V, Vcm = 0V, Rs = 50 Ohms. "Deltas not required on B-Level product. Deltas required for S-Level product ONLY as specified on Internal Processing Instructions (IPI)." Vio Input Offset Voltage -1.2 1.2 mV 1 Icc Power Supply Current -1 1 mA 1 Note 1: Parameter tested go-no-go only. 3 MILITARY DATA SHEET MNLF156-X REV 0BL Graphics and Diagrams GRAPHICS# DESCRIPTION 05094HR (blank) H08CRE (blank) See attached graphics following this page. 4